Hurricane 1400 BHP (7875P) - Dual Ceramic Ball Bearing Performance Turbocharger - Reverse Rotation

Hurricane 1400 BHP (7875P) - Dual Ceramic Ball Bearing Performance Turbocharger - Reverse Rotation

  • 78mm Compressor Wheel Inducer
  • 75mm Turbine Wheel Exducer
  • CURVED COMPRESSOR WHEEL
  • REVERSE ROTATION
  • Aircraft Grade 2618 lightweight performance billet compressor wheel
  • CNC machined compressor wheel for maximum efficiency
  • Inconel 713c Turbine Wheel for extreme turbine temperatures
  • Dual Ceramic Ball Bearing System
  • High Speed VSR Balanced inc. certificate
  • Max Flow rate: 1400bhp

7-10 WORKING DAYS DISPATCH TIME

£783.10
£978.88
Earn0
reward points
Add To Your Wishlist

Oh No! This product is out of stock. Would you like to know when it's avaliable again?

  • Description / Features

    Compressor Wheel:

    • Compressor Wheel - CNC Machined 2618 Billet Alloy (Rated 5 Bar (70psi)
    • Compressor Wheel Inducer: 78MM
    • Compressor Wheel Exducer: 102MM
    • Compressor Wheel Trim: 58
    • Compressor Housing A/R: 0.85
    • Compressor Housing Inlet: 4"
    • Compressor Housing Outlet: 3"
    • Compressor Housing Pipe Fitment: Push on (secured with hose clamp (not included))
    • Compressor Housing: Anti Surge


    Turbine Wheel:

    • Turbine Wheel – Inconel 713C Turbine wheel/AISI4140 Forged Shaft (Rated 850 degrees centigrade)
    • Turbine Wheel Inducer: 82MM
    • Turbine Wheel Exducer: 75MM
    • Turbine Wheel Trim: 84
    • Maximum Shaft Speed: RPM


    Turbine Housing:

    • Turbine Housing – 850 degrees centigrade rated SiMo Ductile Iron
    • Turbine Inlet: 0.96 T4, 1.25 T4, 1.01 V Band,1.28 V Band
    • Turbine Outlet: 3" V Band
    • Internal Wastegate: No


    Other Features:

    • Oil Inlet: 7/16” 24TPI inc Inverted flare (restricted AN4 union included with inverted flare)
    • Oil Outlet: 38mm Bolt Centres (standard GT)
    • Water Ports: M14 x 1.5mm
    • Speed Sensor Port: No
    • Vacuum Take Off: Yes
    • Bearing Systems: Steel Ball Race inc dense heavy duty ceramic ball bearings
    • Balanced: Fully Balanced (no further balancing required). Certification supplied.


    WARNING:

    • Water cooling must be used to ensure reliability
    • Turbocharger oil pressure should not exceed 4.6bar
    • Maximum Turbine shaft speed must not exceeded


    installation-guide-button-red.png


    PHOTOS FOR ILLUSTRATION ONLY

  • Replaces

    Gen 3 PTE7875

    enhanced-turbo-comparison-sheet.png

  • Dispatch Time

    7-10 Working Days.

  • Warranty

    We are that confident in the quality of our products that we offer 2 Years return-to-base warranty* on all of our ball bearing performance turbocharger, which covers poor workmanship or faulty components (a rarity in performance products). Check our our warranty page here, which advises the warranty procedure in a clear, detailed manner. Alternatively, contact us for more assistance. *as of September 2024