Compressor Wheel:

• Compressor Wheel - CNC Machined 2618 Billet Alloy (Rated 5 Bar (70psi)
• Compressor Wheel Inducer: 68MM
• Compressor Wheel Exducer: 84MM
• Compressor Wheel Trim: 65

Turbine Wheel:

• Turbine Wheel – Inconel 713C Turbine wheel/AISI4140 Forged Shaft (Rated 850 degrees centigrade)
• Turbine Wheel Inducer: 68MM
• Turbine Wheel Exducer: 62MM
• Turbine Wheel Trim: 84
• Maximum Shaft Speed: 130,000RPM

Other Features:

• Oil Inlet: 7/16” 24TPI inc Inverted flare (restricted AN4 union included with inverted flare)
• Oil Outlet: 38mm Bolt Centres (standard GT)
• Water Ports: M14 x 1.5mm
• Bearing Systems: Steel Ball Race inc dense heavy duty ceramic ball bearings, Polymer cages (metal available on request)
• Balanced: Fully Balanced (no further balancing required). Certification supplied.

WARNING:

• Water cooling must be used to ensure reliability
• Turbocharger oil pressure should not exceed 4.6bar
• Maximum Turbine shaft speed must not exceeded

PHOTOS FOR ILLUSTRATION ONLY

G35-1050, PTG35-1050

880707-5005S

880707-5006S

7-10 Working Days.

We are that confident in the quality of our products that we offer 2 Years return-to-base warranty* on all of our ball bearing performance turbocharger, which covers poor workmanship or faulty components (a rarity in performance products). Check our our warranty page here, which advises the warranty procedure in a clear, detailed manner. Alternatively, contact us for more assistance. *as of September 2024